Table of Contents

• Backing up
  • Accessing shell
  • Retrieving current configuration settings
• Updating configuration settings

Backing up

Before flashing new parameters, save the current (factory) configuration as a backup. This precaution ensures you can restore the original settings if needed.

Accessing shell

Use Telnet and the previously provided credentials to access the ONT.

telnet 192.168.100.1
Trying 192.168.100.1...
Connected to 192.168.100.1.
Escape character is '^]'.
LXE-010X-A login: leox
Password: leolabs_7
#

Retrieving current configuration settings

flash get GPON_SN
flash get PON_VENDOR_ID
flash get HW_HWVER

Copy the output values somewhere.

Updating configuration settings

To update the settings with your Livebox details:

flash set GPON_SN <YOUR_LIVEBOX_ONT_SERIAL>
flash set PON_VENDOR_ID SMBS
flash set HW_HWVER SMBSXLB7400

Reboot the ONT using the shell command reboot. Then, connect it to your router’s WAN port and configure the following:

• VLAN: 832
• MAC address cloning (from your Livebox)
• DHCP CoS 6 + options 60/77/90

You can use GO-BOX to simplify the process by copying and pasting the required values.